Quick answer: The Bangladesh University of Textiles (BUTEX) grades on a 4.00 scale. An A+ (80 to 100 marks) is worth 4.00 grade points, an A (75 to 79) is 3.75, and the scale runs down through A-, B+, B, B-, C+, C and D (40 to 44) to F (below 40), which is worth 0.00. Your term GPA is the sum of grade point times credit for every course you passed, divided by the total credits you passed. An F grade is left out of that division entirely, which is the single most important thing to understand about the BUTEX grading system, because every generic CGPA calculator on the internet gets it wrong for BUTEX students.
This guide is built from BUTEX’s own published Academic Regulation for the B.Sc. in Textile Engineering, approved by the university Syndicate in 2012 and effective from the 2010-2011 session onwards. It covers the official grading table, the marks split for theory and practical courses, the attendance marks table, the GPA and CGPA formulas with worked examples that show every division, the retake and improvement rules, the promotion rules, and the CGPA you need to graduate with Honours. Where something could not be verified from a published source, this guide says so plainly instead of guessing.
Check Your BUTEX GPA With the Calculator
The fastest way to check your number is to run it through a calculator that uses the same UGC 4.00 scale BUTEX uses. Use the free calculator on the CGPA Calculator Pro homepage: enter each course with its credit and its letter grade, and it applies the same grade points as the BUTEX table below. BUTEX does not have a dedicated calculator page on this site, so the homepage calculator is the right tool.
One warning before you type anything in. If you have an F grade, do not enter it as a normal row. The BUTEX regulation says an F grade is not counted in GPA calculation, so a calculator that divides by attempted credits will understate your GPA. Leave the F course out of the calculator entirely, then read the worked example in the F trap section below to see the difference it makes: 3.50 against 2.92.
To use the calculator properly, you need three things from your grade sheet: the letter grade of every course, the credit of every course, and whether each course is theory or practical. Gather those first, then the calculator takes about two minutes.
What BUTEX Is and Why Its Grading System Is Different
The Bangladesh University of Textiles, universally known as BUTEX, is the only public university in Bangladesh dedicated entirely to textile engineering. It sits at 92 Shahid Tajuddin Ahmed Sharani, Tejgaon, Dhaka-1208, and it was established on 22 December 2010. Every undergraduate degree it awards is a B.Sc. in Textile Engineering, with the student specialising in one department: Yarn Manufacturing, Fabric Manufacturing, Wet Processing, Apparel Manufacturing, Textile Management and Business Studies, or Textile Fashion and Design. Newer departments include Environmental Science and Engineering and Machine Design and Maintenance, and the university now has 11 departments with 630 first-year seats for the 2026-27 session.
The degree runs for four academic years, divided into eight Terms. BUTEX calls an academic year a Level (Level 1 to Level 4) and a semester a Term (Term-I and Term-II). The academic year runs from July to June. Each Term has 15 weeks of classes, two weeks of recess, and three weeks of term final examinations.
What makes the BUTEX grading system different is not the grade table. The table is the standard UGC uniform 4.00 scale, identical to the tables published by BUET, Bangladesh Agricultural University and other public universities. What is different is everything around the table: the F rule, the retake cap, the improvement limits, the attendance gate, and the split between theory and practical passing grades. A student who only knows the table will still calculate their GPA wrong.
The Official BUTEX Grading Table for 2026
This is the grading table from clause 8.2 of BUTEX’s Academic Regulation, and it is the table you should use for every calculation in this guide.
| Marks Obtained (%) | Letter Grade | Grade Point | What It Means |
|---|---|---|---|
| 80 to 100 | A+ | 4.00 | Outstanding |
| 75 to 79 | A | 3.75 | Excellent |
| 70 to 74 | A- | 3.50 | Very good |
| 65 to 69 | B+ | 3.25 | Good |
| 60 to 64 | B | 3.00 | Above average |
| 55 to 59 | B- | 2.75 | Average |
| 50 to 54 | C+ | 2.50 | Below average |
| 45 to 49 | C | 2.25 | Passing, but weak |
| 40 to 44 | D | 2.00 | Minimum pass in theory |
| Below 40 | F | 0.00 | Fail, no credit earned |
| – | I | – | Incomplete |
| – | W | – | Withheld |
Three features deserve attention. First, the bands are five marks wide, so a single mark can move you across a boundary: 79 marks is an A worth 3.75, while 80 is an A+ worth 4.00, a difference of 0.75 grade points on a 3-credit course. Second, the grade point steps are 0.25 apart, not the 0.33 steps of American-style scales, so an American GPA calculator will convert your A- to 3.7 and your B+ to 3.3 and get every number wrong. Third, the transcript shows only the letter grade, the grade point and the final CGPA, not your numerical marks.
The table above is the B.Sc. table. BUTEX’s MBA in Textiles uses the same letter grades and grade points, but a different marks split, which is covered in the marks section below.
A note on currency. This table comes from the Syndicate-approved regulation effective from the 2010-2011 session, and the regulation itself (clause 23.9) gives the Syndicate power to amend it at any time. No newer grading table is published on butex.edu.bd, and the table matches the current UGC uniform scale exactly, so it is the best available authority. Even so, students on current batches should confirm with the Registrar Office or the Controller of Examinations that no amendment has changed the bands.
How Your Marks Are Split in Every Course
Your final mark in a BUTEX course is not one exam. It is a bundle of components, and the bundle is different for theory courses, practical courses, industrial attachment, project work and the comprehensive viva.
For a theory course the split is: class attendance 10 percent, class test 20 percent, and term final examination 70 percent, so 30 percent of your grade is continuous assessment decided during the term. For a practical or sessional course the split is: class attendance 20 percent, experiment and performance 40 percent, report and viva-voce 20 percent, and practical final examination 20 percent, so practical work is weighted far more heavily towards what you do in the laboratory.
Industrial attachment and project and thesis use a 50-50 split: 50 percent continuous assessment and 50 percent final examination. The comprehensive viva is split 60 percent departmental subject and 40 percent other subjects. MBA students should note a different MBA split, published in the BUTEX MBA Academic Calendar 2025: attendance and participation 10 percent, assignment and presentation 10 percent, quizzes and weekly tests 10 percent, midterm exam 20 percent, and final exam 50 percent.
One credit hour equals 50 marks, so a 3-credit theory course is marked out of 150 and a 1-credit practical course out of 50. The published course structure confirms this: Mathematics-I, a 3-credit theory course, is marked 45 for continuous assessment and 105 for the final, totalling 150. This 50-marks-per-credit rule lets you convert any course total into a percentage in your head: divide total marks by credits times 50 and multiply by 100.
Here is a small worked example of the marks split in action. Take a 3-credit theory course marked out of 100. Suppose your attendance is 88 percent, which earns 9 attendance marks out of the 10-mark attendance component. Suppose your four class tests score 16, 18, 15 and 17 out of 20 each. The best three are 18, 17 and 16, totalling 51 out of 60, which scales into the 20-mark class test component as 51 divided by 60 times 20, which is 17. Suppose your term final scores 56 out of 70. Your total is 9 plus 17 plus 56, which is 82 out of 100, or 82 percent, an A+ worth 4.00 grade points.
Fractional marks are rounded only once, up to the next higher number. That is clause 12.4 of the regulation, and it is a small gift: a total of 79.2 becomes 80, not 79, which can be the difference between an A and an A+. And no re-examination of a script is allowed under any circumstances, so the marks you are given are the marks that stand.
The Attendance Rule That Shapes Your Grade Before the Exam
Attendance at BUTEX is not a soft expectation. It is a marks component, an exam-eligibility gate, and a scholarship condition, all at once.
First, attendance is worth marks. In a theory course it is 10 percent of the total, awarded on the published scale: 90 percent attendance and above earns 10 marks, 85 to 89 percent earns 9, 80 to 84 percent earns 8, 75 to 79 percent earns 7, 70 to 74 percent earns 6, 65 to 69 percent earns 5, 60 to 64 percent earns 4, and below 60 percent earns 0. In a practical course attendance is worth 20 percent, so the same scale carries twice the weight.
Second, attendance decides whether you can sit the final exam. The regulation requires at least 75 percent attendance in a course to fill up the entry form and appear in the term final examination. A student with 60 to below 75 percent attendance may still sit, but only by paying additional fees set by the university. A student below 60 percent in any course is not allowed to appear in the term final examination for that course at all. Falling below 60 percent also means re-admission to the same term with the next batch, with all earlier grades of that term cancelled.
Third, attendance affects money. A student whose average attendance falls short of 75 percent in any of the theory, practical, sessional or field work courses of an academic year is not eligible for any scholarship, stipend or grant in the following academic session.
The practical advice is simple and numerical. Aim for 90 percent attendance, because that earns the full 10 attendance marks and clears every gate with room to spare. Treat 75 percent as a hard floor, not a target, because dipping below it costs you extra fees and puts your scholarship at risk. And never let any single course fall below 60 percent, because that course is lost for the term.
The BUTEX GPA Formula, Step by Step
The BUTEX GPA formula looks simple, and it is simple, but it has one step that trips up almost every student who calculates it for the first time. Here is the full method, exactly as the regulation states it.
Step 1: For each course, find its letter grade and convert it to grade points using the table above. A student who obtains a D or higher grade earns the credits of that course. A student who obtains an F earns no credits for that course. Step 2: For each course you passed, multiply its grade point by its credits. A 3-credit course with an A- (3.50) gives 3 times 3.50, which is 10.50 grade points. Step 3: Add up all the grade points from step 2. This is your total grade points for the term. Step 4: Add up the credits of the courses you passed. This is your divisor. Do not include the credits of any course you failed. Step 5: Divide total grade points by total passed credits. The result is your GPA, rounded to two decimal places for reporting.
For CGPA, the method is the same but wider. Add up the grade points from every term you have completed, add up the credits you passed in every term, and divide the first total by the second. Your CGPA is not the average of your term GPAs, and the worked example in the two-term section shows why the two methods give different answers. Also note that BUTEX rounds GPA and CGPA to two decimal places, while some other Bangladeshi universities report three.
One more definitional point. The regulation’s formula text says the GPA divisor is the “total courses passed or completed”, and clause 14.6 states it directly: an F grade will not be counted for GPA calculation. There is no ambiguity in the source. The F is out of the divisor, and the worked examples below show the size of the effect.
Worked Example 1: A Full First-Term GPA on 20 Credits
This example uses the real Level-1 Term-I course structure for the Yarn Manufacturing programme, with realistic grades, and every step is shown.
| Course | Credits | Grade | Grade Point | Grade Point x Credits |
|---|---|---|---|---|
| Mathematics-I | 3 | A- | 3.50 | 3 x 3.50 = 10.50 |
| Physics-I | 3 | B+ | 3.25 | 3 x 3.25 = 9.75 |
| Physics-I (Practical) | 1 | A | 3.75 | 1 x 3.75 = 3.75 |
| Chemistry-I | 3 | A | 3.75 | 3 x 3.75 = 11.25 |
| Chemistry-I (Practical) | 1 | B | 3.00 | 1 x 3.00 = 3.00 |
| Textile Fibers: Natural Fibers | 3 | B+ | 3.25 | 3 x 3.25 = 9.75 |
| Introduction to Textile | 2 | A- | 3.50 | 2 x 3.50 = 7.00 |
| Engineering Material | 2 | B | 3.00 | 2 x 3.00 = 6.00 |
| Machine Shop Practice (Practical) | 1 | A- | 3.50 | 1 x 3.50 = 3.50 |
| Engineering Drawing (Practical) | 1 | B+ | 3.25 | 1 x 3.25 = 3.25 |
| Total | 20 | 67.75 |
Add the grade points step by step: 10.50 plus 9.75 is 20.25; plus 3.75 is 24.00; plus 11.25 is 35.25; plus 3.00 is 38.25; plus 9.75 is 48.00; plus 7.00 is 55.00; plus 6.00 is 61.00; plus 3.50 is 64.50; plus 3.25 is 67.75. The total credits are 3 plus 3 plus 1 plus 3 plus 1 plus 3 plus 2 plus 2 plus 1 plus 1, which is 20. The GPA is 67.75 divided by 20, which is 3.3875, rounded to two decimal places as 3.39.
Two things are worth noticing. First, the 1-credit practical courses look small, but there are four of them in this term, totalling 4 credits, which is a fifth of the term. A student who ignores practical courses while chasing theory grades is ignoring 20 percent of the term. Second, the difference between an A and an A- on a 3-credit course is 0.75 grade points, which moves this GPA by 0.0375. Small differences per course add up across ten courses.
Worked Example 2: The F Trap (52.50/15 = 3.50, Not 2.92)
This is the calculation that generic CGPA calculators get wrong for BUTEX students. Take a student who attempted six courses totalling 18 credits in a term, and failed one of them.
| Course | Credits | Grade | Grade Point | Grade Point x Credits |
|---|---|---|---|---|
| Course 1 | 3 | A+ | 4.00 | 3 x 4.00 = 12.00 |
| Course 2 | 3 | A | 3.75 | 3 x 3.75 = 11.25 |
| Course 3 | 3 | A- | 3.50 | 3 x 3.50 = 10.50 |
| Course 4 | 3 | B+ | 3.25 | 3 x 3.25 = 9.75 |
| Course 5 | 3 | B | 3.00 | 3 x 3.00 = 9.00 |
| Course 6 | 3 | F | 0.00 | 0 credits earned |
| Passed total | 15 | 52.50 |
Add the passed grade points: 12.00 plus 11.25 is 23.25; plus 10.50 is 33.75; plus 9.75 is 43.50; plus 9.00 is 52.50. The correct BUTEX calculation divides by the 15 credits passed: 52.50 divided by 15 is exactly 3.50. That is the GPA the university will report. The wrong calculation, which is what most online CGPA calculators do, divides by all 18 attempted credits: 52.50 divided by 18 is 2.9167, rounded to 2.92, which is 0.58 lower than the real GPA.
The F still hurts, and it hurts badly: the student loses 3 credits, must repeat the course next term, can score no better than a B on the repeat, and the F stays on the transcript forever. But it does not drag the GPA divisor down, and any tool that tells you otherwise is not following the BUTEX regulation. If you use the calculator on the CGPA Calculator Pro homepage, leave the failed course out of your entry and your result will match the university’s method.
Worked Example 3: CGPA Across Two Terms
CGPA is the running total across all terms, and the correct way to compute it is to pool all grade points and all passed credits, then divide once. Averaging the term GPAs is wrong whenever the terms have different credit loads, because a term with more credits should count more.
Take the student from worked example 1. Term I: 67.75 grade points on 20 credits, GPA 67.75 divided by 20, which is 3.3875, reported as 3.39. Now suppose Term II goes very well: 22 credits, 88.00 grade points, GPA 88.00 divided by 22, exactly 4.00.
The correct CGPA pools everything: total grade points 67.75 plus 88.00, which is 155.75; total credits 20 plus 22, which is 42; CGPA 155.75 divided by 42, which is 3.7083, reported as 3.71.
The wrong method averages the two term GPAs: 3.3875 plus 4.00 is 7.3875, divided by 2 is 3.6938, reported as 3.69. The difference is only 0.02 here, but it grows when the credit loads differ more, and over eight terms it can mislead a student tracking a 3.75 Honours target by a tenth of a point. Pool the totals. Never average the averages.
The same pooling rule applies when you add a retake. When the failed course from worked example 2 is cleared with a B in the next available term, its 3 credits and its 9.00 grade points (3 times 3.00) join the pool in the term the repeat is taken, and the CGPA is recomputed from the pooled totals. The original F contributes nothing to the pool, but it remains visible on the transcript.
Worked Example 4: The Impossible Target
Students often ask whether they can still reach a target CGPA, and the honest answer is sometimes no. The formula is simple: required grade points equal target CGPA times total credits after the next term, minus the grade points you already have. If the required average per credit is above 4.00, the target is mathematically impossible.
Take a student with a CGPA of 3.10 over 60 completed credits: 3.10 times 60 is 186.00 grade points. They have one term of 20 credits left and want to reach 3.75. After that term they will have 80 credits, so they need 3.75 times 80, which is 300.00 grade points in total, or 300.00 minus 186.00, which is 114.00 grade points from the next 20 credits: 114.00 divided by 20 is 5.70 per credit. The maximum any course can give is 4.00, so the target is impossible.
Even a perfect term does not get them there. All A+ grades in the next 20 credits give 20 times 4.00, which is 80.00 grade points. Their total becomes 186.00 plus 80.00, which is 266.00, over 80 credits: 266.00 divided by 80 is 3.325, reported as 3.33. That is the ceiling. Aiming for 3.75 from 3.10 with 20 credits left is aiming at a wall.
The same formula can find a reachable target. To reach 3.25 after that term, the student needs 3.25 times 80, which is 260.00 grade points, so they need 260.00 minus 186.00, which is 74.00 grade points from 20 credits, or 3.70 per credit on average. That means mostly A grades with some A- grades, which is hard but possible. Run this calculation before you set a target, and set the target the arithmetic allows.
GPA vs CGPA at BUTEX: What Each Number Means
BUTEX students use two numbers, and confusing them causes real mistakes. GPA is the grade point average for one Term. CGPA is the cumulative average from Level-1 Term-I up to the most recent term. Both use the same formula, but the GPA covers one term’s courses and the CGPA covers every course you have passed since you enrolled.
The GPA tells you how one term went, and it decides the Dean’s List for that academic year, which requires a GPA of 3.75 or above in the regular Terms of the year. The CGPA tells you where you stand overall, and it decides promotion between Levels (2.20 minimum), graduation (2.25 minimum), Honours (3.75), and the University Gold Medal. Employers and scholarship committees almost always ask for CGPA, not term GPA, because it summarises the whole degree.
The relationship between them is one-directional in the short run: a single great term moves a low CGPA only a little, because the CGPA is anchored by all the credits behind it. A student with 100 credits at 3.00 has 300.00 grade points banked. A perfect 20-credit term adds 80.00 points and 20 credits, giving 380.00 divided by 120, which is 3.1667, reported as 3.17. One perfect term moved the CGPA by 0.17. That is why early terms matter so much: the first 40 credits carry the same weight per credit as the last 40, but there is less time left to dilute them later.
Retaking a Failed Course at BUTEX: The B Cap and the One-Chance Rule
Failing a course at BUTEX is recoverable, but the recovery has strict limits. The rules come from clauses 14.5 and 14.6 of the regulation, and they are unusually strict by Bangladeshi standards.
First, a student who obtains an F in any theory course must repeat the course in the next available respective term; the repeat is not optional. Second, when a student repeats a course in which they previously obtained an F, they are not eligible to get a grade better than B in that course: the ceiling is 3.00 grade points, no matter how well they perform. Third, a student normally gets one chance of clearing an F in a course, so a second failure in the same course leaves very few options.
Fourth, the F is not counted in GPA calculation, but it stays permanently on the grade sheet and the transcript, and clearing the course does not erase it; the student gets a supplementary transcript recording the cleared course. Fifth, the failed course’s credits do not count towards the degree until the course is cleared, and graduation requires a CGPA of 2.25 with no F remaining. An uncleared F blocks the degree itself, not just the GPA.
The student carries the repeated course alongside the regular load of the next term, and the best possible outcome is a B worth 3.00. A student planning their repeat should treat the B as the target and protect the regular courses in the same term from being crowded out.
Grade Improvement at BUTEX: Below B Only, Four Courses Only
Grade improvement is different from clearing an F, and it has its own limits under clause 16.0. A student with a grade lower than B may repeat that course once for grade improvement, forgoing the earlier grade, and the improved grade cannot be better than B. A student may repeat for improvement a maximum of four courses in the whole B.Sc. programme, and no improvement is allowed in continuous assessment or in practical and sessional courses.
Think carefully before spending one of your four improvement slots. Improving a C (2.25) to a B (3.00) on a 3-credit course gains 2.25 grade points (3 times 0.75). Improving a B- (2.75) to a B gains only 0.75 grade points (3 times 0.25). The same slot is worth three times as much on the C as on the B-. And because the earlier grade is forgone, the improvement only helps if the new grade is actually higher; a worse repeat replaces a better original, within the B cap. There is no route from a B to an A at BUTEX, however much you want one.
The four-course lifetime limit also means you cannot fix every weak grade. With eight terms and roughly 40 courses in a degree, four improvement slots cover a tenth of your courses. Use them on high-credit courses with low grades, early in the degree, when the improved grade points have the most terms left to lift your CGPA.
Promotion Rules: Moving From Term to Term and Level to Level
Promotion at BUTEX has two layers, and both must be satisfied. The term-to-term layer is about the courses of the term you just finished. The level-to-level layer is about your CGPA and your total failed courses.
To move from Term-I to Term-II of any Level, a student must have appeared in all the courses of the Term-I final examination and must have passed all the practical and sessional courses of Term-I. A student who misses some Term-I final exams may still be promoted to Term-II, with the decision based on their previous result and the number of absent courses, but this is a discretionary route, not a right. The practical pass is not discretionary: the minimum passing grade in a practical or sessional course, and in industrial attachment, project and thesis and comprehensive viva, is C (2.25), higher than the D (2.00) that passes a theory course.
To move from one Level to the next, a student needs a CGPA of 2.20 or more and a cumulative total of failed courses not exceeding 4. A student with five failed courses cannot be promoted even with a CGPA above 2.20, and a student with a CGPA below 2.20 cannot be promoted even with zero failed courses. Both conditions bind.
There are also outer limits. The degree must be completed within a maximum of 14 Terms, and a student who cannot pass within 7 academic years is dropped from the programme. Failing the same Term or Level twice cancels studentship. Re-admission is available, but only three times in the whole programme, only within seven working days of the result publication, and it cancels all grades earned in that term.
Graduation, Honours, Dean’s List and the University Gold Medal
Graduation requires two things: at least 164 credit hours earned (162 for Textile Fashion and Design under the original course structure), and a minimum CGPA of 2.25 with no F grade and no withheld result remaining in any course. A student with a CGPA of 3.00 and one uncleared F cannot graduate, so clear every F first, then check the CGPA.
Honours is awarded to a B.Sc. in Textile Engineering candidate who obtains a CGPA of 3.75 or above. That is a high bar: across 164 credits, a 3.75 CGPA needs 615.00 grade points, which is an average of A- or better in almost every course. The Dean’s List recognises the same standard on a yearly basis: students who maintain a GPA of 3.75 or above in the regular Terms of an academic year have their names published in the Dean’s List of their faculty, and the Dean issues a certificate. Any F in either Term of that year disqualifies the student, even if the GPA is above 3.75.
The University Gold Medal goes to the student who secures the first position with a CGPA not below 3.75 in each department, who completed the coursework within four consecutive academic years, and who never earned an F in any Term. One failed course anywhere in four years ends a Gold Medal candidacy, even if the course was later cleared with a B.
For context, a CGPA of 3.75 also matters beyond the university. It is the level at which most Bangladeshi public university graduates become competitive for fully funded scholarships abroad and for the most selective graduate programmes, and it is the level employers in the textile and garments sector notice first on a CV. The textile industry is Bangladesh’s largest export earner, and BUTEX graduates enter it directly.
BUTEX vs BUFT vs BUET: Three Different Universities
Search results mix these three universities up constantly, and students pay for the confusion with wrong rules. They are three different institutions with three different grading systems, and this section draws the line clearly.
BUTEX is the Bangladesh University of Textiles, a public university in Tejgaon, Dhaka, established in 2010, awarding the B.Sc. in Textile Engineering. Its grading table is the UGC uniform scale, its theory split is 10 percent attendance, 20 percent class test and 70 percent final, its F grade is excluded from the GPA divisor, its retake cap is B, and it allows grade improvement on at most four courses. This guide is about BUTEX.
BUFT is the BGMEA University of Fashion and Technology, a private university run by the garment manufacturers’ association. It also teaches textile engineering and fashion, and its programme names overlap with BUTEX’s, which is why the confusion starts. But BUFT is a different university with its own ordinances and its own credit totals, and its own rules. Never apply a BUFT rule to a BUTEX transcript.
BUET is the Bangladesh University of Engineering and Technology, the country’s oldest and most selective engineering university. Its letter-grade table is identical to BUTEX’s, which is why its grading page ranks in searches for BUTEX, but its marks split is different (30 percent continuous assessment for theory courses, not 10 plus 20), and its rules differ in detail. The BUET page is useful as a cross-check that the UGC table is the same, which this guide used, but it is not a source for BUTEX rules.
Common Mistakes BUTEX Students Make When Calculating CGPA
The first mistake is dividing by attempted credits instead of passed credits. This is the F trap from worked example 2, and it is the most common error because every generic calculator on the internet does it this way. At BUTEX the F is out of the divisor.
The second mistake is averaging term GPAs instead of pooling grade points and credits. Worked example 3 showed the gap: 3.71 correct against 3.69 from averaging.
The third mistake is using an American grade scale. An A- is 3.50 at BUTEX, not 3.7. A B+ is 3.25, not 3.3. A C is 2.25, not 2.0. American calculators also have no D worth 2.00 at the 40 to 44 band. Every number they produce for a BUTEX student is wrong.
The fourth mistake is counting practical courses as if they were theory courses. A practical course passes at C (2.25), not D (2.00), and its marks split is different, with 40 percent for experiment and performance. A D in a practical course is a fail that blocks promotion, while a D in a theory course is a pass.
The fifth mistake is assuming a retake can fix anything. A retake is capped at B, limited to one chance for an F and one repeat per course for improvement, limited to four improvement courses in the whole degree, and unavailable for practical courses.
The sixth mistake is converting CGPA to a percentage by multiplying by 25. BUTEX publishes no official CGPA-to-percentage conversion formula, and no conversion is stated anywhere in its regulation. Multiplying a 3.50 CGPA by 25 to claim 87.5 percent is an invention. If an employer or a foreign university asks for a percentage, ask the Controller of Examinations for the official equivalence.
The seventh mistake is ignoring attendance until it is too late. Attendance is 10 percent of a theory course and 20 percent of a practical course, and below 75 percent it triggers extra fees, below 60 percent it bars you from the final exam, and below 75 percent on average it costs you your scholarship.
How to Raise Your BUTEX CGPA: Tips That Actually Work
Start with the arithmetic, not with motivation. Run the target calculation from worked example 4 and find the average grade point per credit you actually need. If the number is above 4.00, change the target. If it is 3.70, you need mostly A grades. A target expressed as a grade-point average per credit is a plan; a target expressed as “I want a good CGPA” is a wish.
Protect the continuous assessment first, because it is the cheapest marks in the degree. The 30 percent of a theory course that comes from attendance and class tests is decided over 15 weeks in small pieces, and the class test rule drops your worst test. A student who attends 90 percent of classes and takes every class test seriously banks roughly 25 of those 30 marks before the final exam, then needs only about 55 out of 70 in the final to reach an A+.
Give practical courses the same attention as theory courses. Four 1-credit practical courses are 4 credits in a typical first term, and their 40 percent experiment and performance component rewards steady laboratory work rather than last-minute study. Practical grades also carry the higher C passing floor, so a weak practical course is more dangerous than a weak theory course.
Use your improvement slots on high-credit, low-grade theory courses, and use them early. Improving a 3-credit C to a B gains 2.25 grade points; improving a 1-credit B- to a B gains 0.25. The same slot is worth nine times as much in the first case.
Finally, remember that other Bangladeshi public universities publish the same UGC grading table, and their students face the same F confusion, retake questions and attendance arithmetic. Students at Bangladesh Agricultural University, Khulna Agricultural University, Gazipur Agricultural University, Jagannath University and Mawlana Bhashani Science and Technology University face the same table with different local rules, and the same pooling method in this guide, add up all grade points and divide once instead of averaging term GPAs, works for all of them once you substitute their own table and their own F rule.
Frequently Asked Questions About the BUTEX Grading System
Does an F grade count in my BUTEX GPA?
No. Under clause 14.6 of the BUTEX Academic Regulation, an F grade is not counted in GPA calculation. You divide your total grade points by the credits of the courses you passed, leaving the failed course out of both the top and the bottom of the division. In the worked example in this guide, 52.50 grade points divided by 15 passed credits gives a GPA of 3.50, while dividing by all 18 attempted credits would wrongly give 2.92.
What is the minimum CGPA to graduate from BUTEX?
The minimum CGPA for the B.Sc. in Textile Engineering degree is 2.25, with no F grade and no withheld result remaining in any course. You need at least 164 credit hours in total (162 for Textile Fashion and Design under the original course structure), and the degree must be completed within 14 Terms.
Can I get an A if I retake a failed course at BUTEX?
No. When you repeat a course in which you previously obtained an F, you are not eligible to get a grade better than B, which is 3.00 grade points, and you normally get only one chance to clear the F. The same B cap applies to grade improvement repeats.
How many courses can I repeat to improve my grades at BUTEX?
Four courses in the whole B.Sc. programme. You may repeat a course once for grade improvement if your grade in it was lower than B, and you forgo the earlier grade. The improved grade cannot exceed B, and no improvement is allowed in continuous assessment or in practical and sessional courses.
How much does attendance affect my BUTEX grade?
Attendance is 10 percent of a theory course and 20 percent of a practical course, awarded on a scale from 10 marks at 90 percent attendance down to 0 below 60 percent. You need at least 75 percent attendance to sit the term final exam without paying additional fees, and below 60 percent you cannot sit the final at all. Average attendance below 75 percent in a year also makes you ineligible for scholarships and grants in the following session.
What CGPA do I need for Honours and the Dean’s List at BUTEX?
Both need 3.75. Honours is awarded for a final CGPA of 3.75 or above. The Dean’s List needs a GPA of 3.75 or above in the regular Terms of an academic year, and any F in either Term of that year disqualifies you. The Gold Medal needs first position with a CGPA not below 3.75, coursework finished within four consecutive academic years, and no F in any Term.
Is BUTEX the same university as BUFT?
No. BUTEX is the Bangladesh University of Textiles, a public university in Tejgaon, Dhaka. BUFT is the BGMEA University of Fashion and Technology, a private university. They share subject areas and some programme names, but they have different ordinances and different rules. Never apply a BUFT rule, or a BUET rule, to a BUTEX transcript: BUET’s grading table is the same UGC scale, but its marks split is different.
Sources
The BUTEX regulation is the primary source for every rule in this article; the other sources cross-check the grading table against the UGC uniform scale.
- Bangladesh University of Textiles, Academic Regulation, Course Structure and Detail Syllabus for the B.Sc. in Textile Engineering Courses, approved by the Syndicate (Meeting No. 09, 12-04-2012; Meeting No. 14, 26-06-2013), effective from Level-I of session 2010-2011 and onwards, published by the Registrar Office. Full text read at slideshare.net/slideshow/butex-old-syllabus/124422351. Clauses cited: 7.7-7.8 (credits), 8.1-8.3 (grading table and GPA/CGPA formula), 9.0 (marks split), 10.1-10.2 (attendance and class tests), 12.4 (rounding), 13.2 (no re-examination), 14.0-14.7 (promotion, F rules, graduation CGPA), 15.0 (Honours, Dean’s List, Gold Medal), 16.0 (improvement), 17.0 and 22.0 (re-admission, withdrawal), 20.2 (exam entry), 23.4 (attendance and scholarships) and 23.9 (power to amend).
- Bangladesh University of Textiles, official website, butex.edu.bd: current undergraduate programme listings (Yarn, Fabric, Wet Process, Apparel, Environmental Science and Engineering, Management, Machine Design and Maintenance) and postgraduate programme listings.
- Bangladesh University of Textiles, Academic Calendar 2025, MBA in Textiles Program, 8th Batch, butex.edu.bd: MBA grading policy and marks distribution (attendance 10, assignment 10, quizzes 10, midterm 20, final 50 percent).
- Bangladesh University of Engineering and Technology, Department of Computer Science and Engineering, undergraduate evaluation page, cse.buet.ac.bd/academics/ug_eval: independent publication of the identical UGC grading table and the identical F rule, used to cross-check the BUTEX table.
- Bangladesh Agricultural University, Undergraduate Ordinance: independent publication of the identical UGC grading table and GPA/CGPA formulas, used as a second cross-check.
- Britannia University, Evaluation and Grading System, britannia.edu.bd: independent publication of the identical UGC uniform grading table, used as a third cross-check.
A note on verification. Two things in this guide are explicitly UNVERIFIED and should be confirmed with the university before you rely on them. First, whether the 2012 Academic Regulation has been amended for current batches: the regulation gives the Syndicate power to amend at any time, and no newer grading table is published on butex.edu.bd, so confirm with the Registrar Office, BUTEX, Tejgaon, Dhaka-1208. Second, there is no probation clause in the 2012 regulation; the nearest rule is the Level-promotion floor of CGPA 2.20. BUTEX also publishes no official CGPA-to-percentage conversion formula, so this guide invents none.